Compare Products
You have no items to compare.
Recently Viewed Products
Additional Information
| mpn | 46/2X1/4TC |
|---|---|
| Shank | N/A |
| Specifications | D= 3/4 inch D= 19.1 mm C= 14 mm B= 19.1 mm A= 90 degrees Shank Diameter= 1/4 inch Shear= 5 degrees |
| Product Includes | No |
| SKU | 5027654008591 |
| Video | N/A |
Trend 46/2X1/4TC Trimming cutter 19.1 mm diameter Self-guiding trimmers with bearings mounted on end of cutter.
For trimming plastic or plywood overlay.
For copy profiling, use the bearing to follow a template or base edge of board.
An approximate 3mm overlap should be left before copy profiling. When using plastic laminate adhesive to dry before trimming. This avoids clogging the guide bearing.
Refs. T46/1, 46/2 and 46/20 are downcut to prevent breakout on veneer.
Ref. 46/211 has a sleeved bearing to allow for regrinds in case of resharpening.
015
For trimming plastic or plywood overlay.
For copy profiling, use the bearing to follow a template or base edge of board.
An approximate 3mm overlap should be left before copy profiling. When using plastic laminate adhesive to dry before trimming. This avoids clogging the guide bearing.
Refs. T46/1, 46/2 and 46/20 are downcut to prevent breakout on veneer.
Ref. 46/211 has a sleeved bearing to allow for regrinds in case of resharpening.
015
Write Your Own Review
D= 3/4 inch
D= 19.1 mm
C= 14 mm
B= 19.1 mm
A= 90 degrees
Shank Diameter= 1/4 inch
Shear= 5 degrees
D= 19.1 mm
C= 14 mm
B= 19.1 mm
A= 90 degrees
Shank Diameter= 1/4 inch
Shear= 5 degrees
