Loading...

Trend AR/JIG Aperture Radius Jig

Sku
AR/JIG
Excl. VAT £87.60 Incl. VAT £105.12 Excl. VAT Incl. VAT £105.12
Item in stock
-
+
Aperture Radius Jig
A jig to rout out apertures, recesses and radii in work tops to fit a range of sinks and hobs, and to suit curved cabinets.
  • Will cut both an internal and external radiius with the use of either pins or engraved sight lines.
  • Made from 12mm hardwearing CNC machined Compact Grade High Pressure Laminate.
  • Will cut a 90 degree angle, which when combined with the straight slot will allow a hob or sink aperture to be routed. Central slot allows cuts up to 820mm long.
  • Radius curves at 40mm, 60mm, 80mm, 100mm, 150mm and 250mm, and has external radii of 50mm, 100mm and 200mm
  • Jig has a 45 degree end cut , plus 26mm and 35mm cabinet door hinge recess facility.
  • Engraved lines to position jig to marked position on the worktop.
  • Each of the six radius curves is paired with a set of peg holes that will set the jig to work top edge.
  • Pins made from ABS plastic for strength.
Jig requires:
  • A portable plunge router with 12.7mm (1/2 inch) shank capacity and minimum 1300 watts.
  • A template guide bush with 30mm outside diameter.
  • A TCT router cutter with 12.7mm (1/2 inch) diameter and 50mm (2 inch) cut length.
  • Two clamps.
Corner angle= 90 degree Slot length= 830 mm
Radius curves= 40, 60, 80, 100
Copyright © 2021 CNS Power Tools Limited