Details
Trend C074X8MMTC Rounding over 3.2mm radius x 9.5mm cut Self-guiding cutters for rounding over edges do not require a side fence.
They are supplied with two bearings.
Use the larger bearing for a round-over.
If the cutter is lowered, a top quirk can be produced.
Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece.
096
They are supplied with two bearings.
Use the larger bearing for a round-over.
If the cutter is lowered, a top quirk can be produced.
Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece.
096
Additional Information
mpn | C074X8MMTC |
---|---|
Shank | N/A |
Specifications | D= 19 mm C= 3/8 inch C= 9.5 mm B= 9.5 mm B2= 12.7 mm R= 1/8 inch R= 3.2 mm Shank Diameter= 8 mm |
Product Includes | No |
sku | 5027654035290 |
Video | N/A |