Details
Trend C076X1/4TC Rounding over 6.3mm radius x 12.7mm cut Self-guiding cutters for rounding over edges do not require a side fence.
They are supplied with two bearings.
Use the larger bearing for a round-over.
If the cutter is lowered, a top quirk can be produced.
Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece.
096
They are supplied with two bearings.
Use the larger bearing for a round-over.
If the cutter is lowered, a top quirk can be produced.
Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece.
096
Additional Information
| mpn | C076X1/4TC |
|---|---|
| Shank | N/A |
| Specifications | D= 1 inch D= 25.4 mm C= 1/2 inch C= 12.7 mm B= 9.5 mm B2= 12.7 mm R= 6.3 mm R= 1/4 inch Shank Diameter= 1/4 inch |
| Product Includes | No |
| sku | 5027654016909 |
| Video | N/A |
