Details
Trend C077X1/4TC Rounding over 7.9mm radius x 12.7mm cut Self-guiding cutters for rounding over edges do not require a side fence.
They are supplied with two bearings.
Use the larger bearing for a round-over.
If the cutter is lowered, a top quirk can be produced.
Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece.
096
They are supplied with two bearings.
Use the larger bearing for a round-over.
If the cutter is lowered, a top quirk can be produced.
Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece.
096
Additional Information
mpn | C077X1/4TC |
---|---|
Shank | N/A |
Specifications | D= 28.5 mm C= 1/2 inch C= 12.7 mm B= 9.5 mm B2= 12.7 mm R= 5/16 inch R= 7.9 mm Shank Diameter= 1/4 inch |
Product Includes | No |
sku | 5027654016916 |
Video | N/A |