Compare Products
You have no items to compare.
Recently Viewed Products
Recently Compared Products
Additional Information
| mpn | C078X1/4TC |
|---|---|
| Shank | N/A |
| Specifications | D= 31.7 mm C= 5/8 inch C= 15.9 mm B= 9.5 mm B2= 12.7 mm R= 9.5 mm Shank Diameter= 1/4 inch |
| Product Includes | No |
| SKU | 5027654016923 |
| Video | N/A |
Trend C078X1/4TC Rounding over 9.5mm radius x 15.9mm cut Self-guiding cutters for rounding over edges do not require a side fence.
They are supplied with two bearings.
Use the larger bearing for a round-over.
If the cutter is lowered, a top quirk can be produced.
Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece.
096
They are supplied with two bearings.
Use the larger bearing for a round-over.
If the cutter is lowered, a top quirk can be produced.
Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece.
096
Write Your Own Review
D= 31.7 mm
C= 5/8 inch
C= 15.9 mm
B= 9.5 mm
B2= 12.7 mm
R= 9.5 mm
Shank Diameter= 1/4 inch
C= 5/8 inch
C= 15.9 mm
B= 9.5 mm
B2= 12.7 mm
R= 9.5 mm
Shank Diameter= 1/4 inch
