Trend Direct UK

( 0 ) Items in basket

Items: Total: £0.00

C170AX1/2TC Guided bevel raiser & back cut 15 degree - 1/2" Shank

Be the first to review this product

Available

£70.54 Excl. VAT £84.65 Incl. VAT

Trend C170AX1/2TC Guided bevel raiser & back cut 15 degree Panel raiser cutters for producing the panel for cabinet panelled doors.
The tool is fitted with a back cutter to ensure a maximum panel tongue thickness of 6.3mm.
Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF.
Take several passes by adjusting back fence position with each pass.
Stationary use only.
Back cutter must be fitted at 90 degrees to main tool to reduce the cutting impact.

105

C170AX1/2TC Guided bevel raiser & back cut 15 degree - 1/2" Shank

More Views

Additional Information

mpn C170AX1/2TC
Shank N/A
Specifications D= 88.9 mm d= 54 mm C= 5/8 inch C= 16 mm B= 16 mm A= 15 degrees Tongue= 6.3 mm Reveal= 36.5 mm OL= 77.5 mm Shank Diameter= 1/2 inch Timber thickness min.= 16 mm* Timber thickness max.= 25.4 mm *(back of panel will not need back cutting)
Product Includes No
SKU 5027654051474
Video N/A
Trend C170AX1/2TC Guided bevel raiser & back cut 15 degree Panel raiser cutters for producing the panel for cabinet panelled doors.
The tool is fitted with a back cutter to ensure a maximum panel tongue thickness of 6.3mm.
Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF.
Take several passes by adjusting back fence position with each pass.
Stationary use only.
Back cutter must be fitted at 90 degrees to main tool to reduce the cutting impact.

104

Write Your Own Review

You're reviewing: C170AX1/2TC Guided bevel raiser & back cut 15 degree - 1/2" Shank

D= 88.9 mm
d= 54 mm
C= 5/8 inch
C= 16 mm
B= 16 mm
A= 15 degrees
Tongue= 6.3 mm
Reveal= 36.5 mm
OL= 77.5 mm
Shank Diameter= 1/2 inch

Timber thickness min.= 16 mm*
Timber thickness max.= 25.4 mm
*(back of panel will not need back cutting)