Trend Direct UK

( 0 ) Items in basket

Items: Total: £0.00

COMBI66 Worktop Jig 500-650mm Peninsular

Be the first to review this product

Available

£93.79 Excl. VAT £112.55 Incl. VAT

Trend COMBI66 Worktop Jig 500-650mm Peninsular A worktop jig, designed to enable all 1/2 inch shank plunge routers to cut precise butt & scribe joints in postform workstops.
Machined from hardwearing solid laminate.
Will produce a joint in 15 minutes including setting-up time.
Out-of-square joints can be accommodated.
Facilities to cut various widths of board and thicknesses up to 42mm.
Integral panel bolt connector recessing template with easy spanner access.
Width setting stop for accurate positioning.
Supplied with clear & comprehensive instructions for use.
A single male and female template in 16mm solid laminate.
Facility to join boards from 500mm to 650mm wide. Two bolt recess slot for connecting bolts.
Three alloy location bushes & width setting stop.
Cuts out of square joints (max. 3 degree).
Jig requires:
A portable plunge router with 12.7mm (1/2 inch) shank capacity and minimum 1300 watts.
A template guide bush with 30mm outside diameter.
A TCT router cutter with 12.7mm (1/2 inch) diameter and 50mm (2 inch) cut length.
Two 100mm (4 inch) throat clamps.

151

COMBI66 Worktop Jig 500-650mm Peninsular

More Views

Additional Information

mpn COMBI66
Shank N/A
Specifications Length= 880 mm Width= 233 mm Thickness= 16 mm Weight= 3.3kg Female cut material width loss= 23 mm
Product Includes 3 x Location Bushes 1 x Length Stop
SKU 5027654529652
Video N/A
Trend COMBI66 Worktop Jig 500-650mm Peninsular A worktop jig, designed to enable all 1/2 inch shank plunge routers to cut precise butt & scribe joints in postform workstops.
Machined from hardwearing solid laminate.
Will produce a joint in 15 minutes including setting-up time.
Out-of-square joints can be accommodated.
Facilities to cut various widths of board and thicknesses up to 42mm.
Integral panel bolt connector recessing template with easy spanner access.
Width setting stop for accurate positioning.
Supplied with clear & comprehensive instructions for use.
A single male and female template in 16mm solid laminate.
Facility to join boards from 500mm to 650mm wide. Two bolt recess slot for connecting bolts.
Three alloy location bushes & width setting stop.
Cuts out of square joints (max. 3 degree).
Jig requires:
A portable plunge router with 12.7mm (1/2 inch) shank capacity and minimum 1300 watts.
A template guide bush with 30mm outside diameter.
A TCT router cutter with 12.7mm (1/2 inch) diameter and 50mm (2 inch) cut length.
Two 100mm (4 inch) throat clamps.

150

Write Your Own Review

You're reviewing: COMBI66 Worktop Jig 500-650mm Peninsular

Length= 880 mm
Width= 233 mm
Thickness= 16 mm
Weight= 3.3kg
Female cut material width loss= 23 mm

3 x Location Bushes
1 x Length Stop