KWJ700 700mm Kitchen Worktop Jig

KWJ700 700mm Kitchen Worktop Jig

Available

Image Product Price Qty Buy
KWJ700 700mm Kitchen Worktop Jig 700mm
Excl. VAT £60.50 Incl. VAT £72.60
C153X1/2TC Worktop Cutter Two flute cutter 12.7mm Worktop Cutter - 1/2" Shank
Excl. VAT £10.17 Incl. VAT £12.20
CR/KFP/5 Kitchen Fitters Pack C153 Worktop Cutters x 5 pieces - 1/2" Shank
Excl. VAT £44.06 Incl. VAT £52.87
KFP/1 Kitchen Fitters Pack three x worktop cutters in case
Excl. VAT £29.00 Incl. VAT £34.80
GB30 Guide bush 30mm diameter
Excl. VAT £7.28 Incl. VAT £8.74
RT/13X1/2TC Rota-Tip straight 12.7 mm diameter - 1/2" Shank
Excl. VAT £53.41 Incl. VAT £64.09
CASE/1001 Carry case COMBI1001 and 1002
Excl. VAT £26.90 Incl. VAT £32.28
FC/200 F clamp 200mm x 100mm
Excl. VAT £13.75 Incl. VAT £16.50
KWJ/PIN/4 KWJ900 & KWJ700 - 10mm pin pack of 4
Excl. VAT £7.80 Incl. VAT £9.36
T10EK 1/2" 2000w Router 230V & kitbox
Excl. VAT £212.50 Incl. VAT £255.00
T10ELK 1/2" 2000w Router 110V & kitbox
Excl. VAT £212.50 Incl. VAT £255.00
M/KWS01 Kitchen Worktop Jig Offset Scriber
Excl. VAT £19.19 Incl. VAT £23.03

Quick Overview

KWJ700 700mm Kitchen Worktop Jig
Trend KWJ700 kitchen Worktop jig Trade work top jig for up to 700mm worktops. Hard wearing solid laminate 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up.Left hand and right hand corners, 400mm radius peninsular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps. Fixed lengths for 250mm, 300mm, 400mm, 500mm, 550mm, 600mm, 616mm, 650mm and 700mm wide worktops. Cuts up to 40mm thick worktops with or without anti-drip postformed edge.Three open-ended bolt recesses (dog bone style) for 150mm bolts.
Engraved lines for short 65mm bolts and worktop cross-cut. 10mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up. Engraved markings for identification of pin holes. Pins made from ABS plastic for strength.
Jig requires:
A portable plunge router with 12.7mm (1/2 inch) shank capacity and minimum 1300 watts.
A template guide bush with 30mm outside diameter.
A TCT router cutter with 12.7mm (1/2 inch) diameter and 50mm (2 inch) cut length.
Two clamps.

Click on the image for the full Specifications.
Read More +

Details

KWJ700 700mm Kitchen Worktop Jig
Trend KWJ700 kitchen Worktop jig Trade work top jig for up to 700mm worktops. Hard wearing solid laminate 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up.Left hand and right hand corners, 400mm radius peninsular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps. Fixed lengths for 250mm, 300mm, 400mm, 500mm, 550mm, 600mm, 616mm, 650mm and 700mm wide worktops. Cuts up to 40mm thick worktops with or without anti-drip postformed edge.Three open-ended bolt recesses (dog bone style) for 150mm bolts.
Engraved lines for short 65mm bolts and worktop cross-cut. 10mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up. Engraved markings for identification of pin holes. Pins made from ABS plastic for strength.
Jig requires:
A portable plunge router with 12.7mm (1/2 inch) shank capacity and minimum 1300 watts.
A template guide bush with 30mm outside diameter.
A TCT router cutter with 12.7mm (1/2 inch) diameter and 50mm (2 inch) cut length.
Two clamps.

Additional Information

mpn KWJ700
Shank No
Specifications Length= 985 mm Width= 390 mm Thickness= 12 mm Weight= 5.4 kg End Cut= 45 degrees Corner Radius= 40 mm Corner Radius= 100 mm Corner Radius= 400 mm Corner Mitre Joint= 45 degrees Female cut material width loss= 35 mm
Product Includes 6 x ABS Plastic Pins
sku 9780301658711
Video https://www.youtube.com/watch?v=HzJza9Kt9vY