Compare Products
You have no items to compare.
Recently Viewed Products
Additional Information
| mpn | PCD/11X1/2 |
|---|---|
| Shank | No |
| Specifications | D= 5/8 inch D= 15.9 mm C= 1 inch C= 25.4 mm OL= 68 mm Shank Diameter= 1/2 inch |
| Product Includes | No |
| SKU | 5027654026922 |
| Video | N/A |
Trend PCD/11X1/2 PCD Disposable MDF cutter Polycrystalline Diamond tipped cutter gives a significant increase in tool life compared to TC tooling.
PCD also gives an accuracy of cut throughout the tool life and faster feed rates as well as reduced downtime.
Use in fixed head, NC or CNC routers only.
Use on MDF, HDF, hard natural timber, veneered and laminated particle board, plywood, hardboard and solid laminate.
Single flute with TC plunge tip.
For MDF, hardboard and solid laminate.
Single flute prevents edge lines.
High wear resistance.
Longer tool life and therefore reduced downtime.
Cannot be re-sharpened.
074
Please note there is a 10 Day Lead Time On These Cutters - Not Available For Next Day
PCD also gives an accuracy of cut throughout the tool life and faster feed rates as well as reduced downtime.
Use in fixed head, NC or CNC routers only.
Use on MDF, HDF, hard natural timber, veneered and laminated particle board, plywood, hardboard and solid laminate.
Single flute with TC plunge tip.
For MDF, hardboard and solid laminate.
Single flute prevents edge lines.
High wear resistance.
Longer tool life and therefore reduced downtime.
Cannot be re-sharpened.
074
Please note there is a 10 Day Lead Time On These Cutters - Not Available For Next Day
Write Your Own Review
D= 5/8 inch
D= 15.9 mm
C= 1 inch
C= 25.4 mm
OL= 68 mm
Shank Diameter= 1/2 inch
D= 15.9 mm
C= 1 inch
C= 25.4 mm
OL= 68 mm
Shank Diameter= 1/2 inch
