Compare Products
You have no items to compare.
Recently Viewed Products
Additional Information
| mpn | PCD/40X1/2 |
|---|---|
| Shank | No |
| Specifications | D= 30 mm C= 7 mm C2= 15 mm R= 3 mm A= 119 degrees Shank Diameter= 1/2 inch |
| Product Includes | No |
| SKU | 5027654033692 |
| Video | N/A |
Trend PCD/40X1/2 PCD slat wall cutter Polycrystalline Diamond tipped cutter gives a significant increase in tool life compared to TC tooling.
PCD also gives an accuracy of cut throughout the tool life and faster feed rates as well as reduced downtime.
Use in fixed head, NC or CNC routers only.
Use on MDF, HDF, hard natural timber, veneered and laminated particle board, plywood, hardboard and solid laminate.
Segmented tip for MDF. High wear resistance. Slat wall cutter to accept a plastic extrusion. Can be serviced for extended life.
074
Please note there is a 10 Day Lead Time On These Cutters - Not Available For Next Day
PCD also gives an accuracy of cut throughout the tool life and faster feed rates as well as reduced downtime.
Use in fixed head, NC or CNC routers only.
Use on MDF, HDF, hard natural timber, veneered and laminated particle board, plywood, hardboard and solid laminate.
Segmented tip for MDF. High wear resistance. Slat wall cutter to accept a plastic extrusion. Can be serviced for extended life.
074
Please note there is a 10 Day Lead Time On These Cutters - Not Available For Next Day
Write Your Own Review
D= 30 mm
C= 7 mm
C2= 15 mm
R= 3 mm
A= 119 degrees
Shank Diameter= 1/2 inch
C= 7 mm
C2= 15 mm
R= 3 mm
A= 119 degrees
Shank Diameter= 1/2 inch
