S60/26LHX1/4STC Plastic single flute downcut spiral 6.3x19mm - 1/4" Shank

S60/26LHX1/4STC Plastic single flute downcut spiral 6.3x19mm - 1/4" Shank

Available

Excl. VAT £44.82 Incl. VAT £53.78
Sku: 5027654051207
Mpn: S60/26LHX1/4STC

Quick Overview

Trend S60/26LHX1/4STC Plastic single flute downcut spiral 6.3x19mm Special high grade sub-micrograin carbide with very high tolerance grinding for smooth clean cut in acylic, wood, and manmade boards, solid surface material and foam boards.
Single O flute design for fast cutting. Increased feed rates allowing for more linear metres in less time.
Super high polished cutting edge with unique mirror finish, resulting in clean cuts, less chance for chip re-welding, effortless chip removal, a superior finish and a longer tool life.
Downcut for better clamping when machining small workpieces and improved finish on the tops of the board.
For use on routers and CNC routers.
Ref. S60/26X1/4STC is an up-cut spiral and can be used to plunge cut.
Ref. S60/26LHX1/4STC is a down-cut spiral but is not recommended for plunge cutting unless ramped into workpiece.
Eject chips up or down depending on tool used.
Designed for plastic, wood, foam board, acrylic, nylon, PVC, PVC trim boards, polycarbonate, solid surface, HDPE, ABS, UHMW, HIPS, PET, Polystyrene, Polypropylene (PP), Acetal and mechanical /engineered plastics.

078
Read More +

Details

Trend S60/26LHX1/4STC Plastic single flute downcut spiral 6.3x19mm Special high grade sub-micrograin carbide with very high tolerance grinding for smooth clean cut in acylic, wood, and manmade boards, solid surface material and foam boards.
Single O flute design for fast cutting. Increased feed rates allowing for more linear metres in less time.
Super high polished cutting edge with unique mirror finish, resulting in clean cuts, less chance for chip re-welding, effortless chip removal, a superior finish and a longer tool life.
Downcut for better clamping when machining small workpieces and improved finish on the tops of the board.
For use on routers and CNC routers.
Ref. S60/26X1/4STC is an up-cut spiral and can be used to plunge cut.
Ref. S60/26LHX1/4STC is a down-cut spiral but is not recommended for plunge cutting unless ramped into workpiece.
Eject chips up or down depending on tool used.
Designed for plastic, wood, foam board, acrylic, nylon, PVC, PVC trim boards, polycarbonate, solid surface, HDPE, ABS, UHMW, HIPS, PET, Polystyrene, Polypropylene (PP), Acetal and mechanical /engineered plastics.

077

Additional Information

mpn S60/26LHX1/4STC
Shank N/A
Specifications DIMENSIONS: D1= 1/4 inches D1= 6.3 mm Cut length= 3/4 inches Cut length= 19 mm Overall length= 51 mm Shank Diameter= 1/4
Product Includes No
sku 5027654051207
Video N/A