Loading...

Trend H/JIG/C Two Part Skeleton Hinge Jig

Sku
H/JIG/C
Excl. VAT £183.32 Incl. VAT £219.98 Excl. VAT Incl. VAT £219.98
Item in stock
-
+

The two part Contractor Hinge Jig is a portable fully adjustable block template set designed for recessing hinges in wooden doors & frames using a plunge router. Comes with case.

Trend H/JIG/C Skeleton Hinge Jig Two Part with Case

The two part Contractor skeleton Hinge Jig is a portable fully adjustable block template set designed for recessing hinges in wooden doors & frames using a plunge router. 

Product includes:

  • 3 x Hinge sliding aperture block assemblies
  • 4 x Bradawls (short blade)
  • 1 x 16mm guide bush
  • 1 x Carry case

Features

  • The hinge jig is easy to use with minimal set-up time, completing the job on-site both accurately & quickly.
  • Used on-site & in joinery workshops to increase productivity with excellent results.
  • Fully adjustable apertures for fire door requirements and renovation work.
  • Can be used on either the inside or outside of doors, rebated frames and on maximum 25mm thick fixed stops.
  • This 2 part jig is ideal for fitting a new door in an old frame.
  • No need for marking out in the conventional way.
  • Quick & simple to set-up as the hinge is used as the pattern.
  • Clean & accurate recesses are achieved every time. Suitable for timber based doors & square butt hinges.
  • Use with a light duty plunge router with 1/4 inch collet.
  • Long reach router cutter / router bit required, 12mm diameter with 70mm overall length.
  • Adjustable edge guides with preset for hinge of 20mm, 25mm and 30mm
  • Trend Unibase may be needed.
  • Patent No. GB249013

Trend T4EK router requires a ref. UNIBASE or special guide bush ref. GB/T4/160.

  • Weight= 2.9 kg
  • Jig overall length= 1956 mm

Hinge sizes possible

  • Length min.= 2 5/8" (67 mm
    )
  • Length max.= 5" (127 mm
    )
  • Width min.= 1/2" (12.7 mm
    )
  • Width max.= 1 3/8" (35 mm
    )

Door sizes possible

  • Height min.= 6' 5" (1956 mm
    )
  • Height max.= 2100 mm
    * (6' 10"*)
  • Thickness min.= 5/8" (16 mm
    )
  • Thickness max.= 2" (51 mm
    )
  • * Please note for doors over 2040mm
    the bottom hinge will be higher than 9" up.
Copyright © 2021 CNS Power Tools Limited