kwj kit

Trend KWJ700 700mm Kitchen worktop jig + CASE/1001 + KFP/1

Available

Excl. VAT £113.00 Incl. VAT £135.60
Sku: 5845210236956
Mpn: KWJ700KIT

Quick Overview

Trend KWJ700 700mm Kitchen worktop jig with carry case and cutter pack.

Trend KWJ700 kitchen Worktop jig Trade work top jig for up to 700mm worktops.
Hard wearing solid laminate 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up.
Left hand and right hand corners, 400mm radius peninsular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps.
Fixed lengths for 250mm, 300mm, 400mm, 500mm, 550mm, 600mm, 616mm, 650mm and 700mm wide worktops.
Cuts up to 40mm thick worktops with or without anti-drip postformed edge.
Three open-ended bolt recesses (dog bone style) for 150mm bolts.
Engraved lines for short 65mm bolts and worktop cross-cut.
10mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up.
Engraved markings for identification of pin holes.
Pins made from ABS plastic for strength.

Comes as a set with the following;
1 x KWJ700 700mm Worktop Jig
1 x CASE/1001 Worktop jig carry case
1 x KFP/1 Kitchen Fitters Pack three x worktop cutters in case
Read More +

Details

Trend KWJ700 700mm Kitchen worktop Jig
Trend KWJ700 kitchen Worktop jig Trade work top jig for up to 700mm worktops.
Hard wearing solid laminate 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up.
Left hand and right hand corners, 400mm radius peninsular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps.
Fixed lengths for 250mm, 300mm, 400mm, 500mm, 550mm, 600mm, 616mm, 650mm and 700mm wide worktops.
Cuts up to 40mm thick worktops with or without anti-drip postformed edge.
Three open-ended bolt recesses (dog bone style) for 150mm bolts.
Engraved lines for short 65mm bolts and worktop cross-cut.
10mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up.
Engraved markings for identification of pin holes.
Pins made from ABS plastic for strength.

CASE/1001 - Carry case for KWJ700/900 and COMBI1002
Hard wearing carry cases to protect and allow for ease of carrying of the Trend COMBI1001, COMBI1002, KWJ700, KWJ900 & HR/JIG

KFP/1 - Kitchen Fitters Pack three x worktop cutters in case
Three piece kitchen fitters router cutter pack containing three 1/2 inch shank worktop cutters supplied in a storage case.

Additional Information

mpn KWJ700KIT
Shank No
Specifications No
Product Includes No
sku 5845210236956
Video No