Trend KWJ750P - Pro Multi-material worktop jig for up to 750mm worktop

Trend KWJ750P - Pro Multi-material worktop jig for up to 750mm worktop

Available

Excl. VAT £107.50 Incl. VAT £129.00
Sku: 5027654071076
Mpn: KWJ750P

Quick Overview


  • FRONT EDGE SETTING All settings are done from the front edge eliminating any discrepancies from scribing or when using non-standard width worktops

  • EASY SET REFERENCE WINDOW Fast set up for any backset, simply align to a measured line

  • 5 BACKSET OPTIONS (3, 5, 10, 24, 35mm) to meet the demands of new materials, edge profiles and trends

  • FLUSH EDGE COMPATABILITY Allows worktops to be cut flush with door faces for handleless contemporary styles without additional measuring or marking up

  • SINGLE PASS JOINT CUTTING ON NARROWER BACKSETS WITH THINNER WORKTOPS Minimises strain on the router and extends cutter life

  • FAST JOINTING Cuts a full male and female joint in 15 minutes including setting up

  • MULTIPLE WORKTOP MATERIAL COMPATABILITY Compact laminate, Composite, Solid Wood, Chipboard Laminate

  • NO SET WORKTOP WIDTH RESTRICTION No need for alignment pins for worktop widths

  • FRUSTRATION FREE SETUP Simple intuitive setup; measure, mark, clamp and cut

  • OFFSET CAMS Unique backset wedges for consistent easy setting

  • EDGE PROFILE COMPATABILITY Covers square edge, small radius, Postform radius and bullnose profiles

  • CLAMP RECESSES For below the surface clamping for unrestricted routing with plunge saw clamps

Read More +

Details


  • FRONT EDGE SETTING All settings are done from the front edge eliminating any discrepancies from scribing or when using non-standard width worktops

  • EASY SET REFERENCE WINDOW Fast set up for any backset, simply align to a measured line

  • 5 BACKSET OPTIONS (3, 5, 10, 24, 35mm) to meet the demands of new materials, edge profiles and trends

  • FLUSH EDGE COMPATABILITY Allows worktops to be cut flush with door faces for handleless contemporary styles without additional measuring or marking up

  • SINGLE PASS JOINT CUTTING ON NARROWER BACKSETS WITH THINNER WORKTOPS Minimises strain on the router and extends cutter life

  • FAST JOINTING Cuts a full male and female joint in 15 minutes including setting up

  • MULTIPLE WORKTOP MATERIAL COMPATABILITY Compact laminate, Composite, Solid Wood, Chipboard Laminate

  • NO SET WORKTOP WIDTH RESTRICTION No need for alignment pins for worktop widths

  • FRUSTRATION FREE SETUP Simple intuitive setup; measure, mark, clamp and cut

  • OFFSET CAMS Unique backset wedges for consistent easy setting

  • EDGE PROFILE COMPATABILITY Covers square edge, small radius, Postform radius and bullnose profiles

  • CLAMP RECESSES For below the surface clamping for unrestricted routing with plunge saw clamps

Additional Information

mpn KWJ750P
Shank No
Specifications Length 985 mm Width 335 mm Thickness 12 mm Weight 4.73 kg End Cut 45 degrees Corner Radius 40 mm Corner Radius 100 mm Corner Radius 400 mm Corner Mitre Joint 45 degrees Female cut material width loss (inset) variable
Product Includes 4 x ABS Plastic pins 4 x Cams (pairs)
sku 5027654071076
Video https://youtu.be/lodd6pJaOPM

You may also be interested in the following product(s)

C152X1/2TC Biscuit jointer set - 1/2" Shank

C152X1/2TC Biscuit jointer set - 1/2" Shank

Excl. VAT £26.06 Incl. VAT £31.27
FC/200 F clamp 200mm x 100mm

FC/200 F clamp 200mm x 100mm

Excl. VAT £14.17 Incl. VAT £17.00
C153/3 - Trend Kitchen Worktop 3 Pack Cutter Set 1/2" Shank

C153/3 - Trend Kitchen Worktop 3 Pack Cutter Set 1/2" Shank

Excl. VAT £24.95 Incl. VAT £29.94