Trend LOCK/JIG Lock Recessing Jig

Trend LOCK/JIG Lock Recessing Jig

Available

Image Product Price Qty Buy
LOCK/JIG Lock Recessing Jig
Excl. VAT £67.50 Incl. VAT £81.00

Out of stock

C172X1/2TC Mortice Cutter - Two flute cutter 12mm diameter
Excl. VAT £14.90 Incl. VAT £17.88
GB160 Guide bush for hinge jig 16mm diameter
Excl. VAT £10.22 Incl. VAT £12.26
GB30 Guide bush 30mm diameter
Excl. VAT £7.28 Incl. VAT £8.74
C/CHISEL Corner chisel HSS For Hinge Jig & Lock Jig
Excl. VAT £12.50 Incl. VAT £15.00
C019X1/4TC Two Flute Cutter 12mm diameter - 1/4" Shank
Excl. VAT £8.87 Incl. VAT £10.64
UNIBASE (unibase) Universal Sub-base with pins and bush
Excl. VAT £14.44 Incl. VAT £17.33
WP-LOCK/T/SET Lock template set (16 pieces) *REPLACEMENT PART*
Excl. VAT £82.60 Incl. VAT £99.12
T10ELK 1/2" 2000w Router 110V & kitbox
Excl. VAT £212.50 Incl. VAT £255.00
T10EK 1/2" 2000w Router 230V & kitbox
Excl. VAT £212.50 Incl. VAT £255.00

Out of stock

Quick Overview

Trend LOCK/JIG Lock Recessing Jig
Trend LOCK JIG Lock Recessing JigThis jig uses a set of interchangeable templates & with a router will cut the mortise & face-plate recess for popular door locks. For most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1 inch face-plate. Deeper mortises can be achieved with a suitable size of auger bit. Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood. Steel plates & body. The jig requires a plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter. Other sizes of template available to special order, please contact Trend Technical Support for more information.

Click on the image above for the full Specifications
Read More +

Details

Trend LOCK/JIG Lock Recessing Jig
Trend LOCK JIG Lock Recessing JigThis jig uses a set of interchangeable templates & with a router will cut the mortise & face-plate recess for popular door locks. For most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1 inch face-plate. Deeper mortises can be achieved with a suitable size of auger bit. Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood. Steel plates & body. The jig requires a plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter. Other sizes of template available to special order, please contact Trend Technical Support for more information.

Additional Information

mpn LOCK/JIG
Shank No
Specifications Door thickness min.= 34 mm Door thickness max.= 58 mm Includes templates for locks having the following face-plate dimensions: Imperial (Metric)= Template 7/8"x 1/8" (22.2x156 mm)= 1 7/8"x 6 " (22.5x152.5 mm)= 2 1"x 4 3/4" (25.4x121 mm)= 3 1"x 5" (25.4x127.5 mm)= 4 1"x 5 1/4" (25.4x133.5 mm)= 5 1"x 5 3/4" (25.4x145 mm)= 6 1"x 6" (25.4x153 mm)= 7 1"x 6" (25.4x156.5 mm)= 8 1"x 6 1/2" (25.4x165.5 mm)= 9 1"x 7" (25.4x177 mm)= 10 1"x 2 1/4" (25x57.5 mm)= 11 UPPER 1"x 2 1/4" (26x56.5 mm)= 11 LOWER 1"x 6 3/8" (25.6x162mm= 12 Mortise Dimensions Imperial (Metric)= Template 5/8" x 2 7/8" (16x72 mm*+)= A 5/8" x 4 1/4" (16x107 mm*)= B 3/4" x 3 1/8" (19x78 mm*)= C 3/4" x 4 1/4" (19x109 mm*)= D *These are maximum mortise length, unless radius ends are squared with a chisel. +Note:actual size of mortise 16x79 mm (5/8" x 3 7/64")
Product Includes 1 x Guide Bush Collar 12 x Face Plate Templates 4 x Mortise Templates 6 x Spacer Fingers
sku 0782272750233
Video https://www.youtube.com/watch?v=5pCGaerq-zQ