Loading...

Trend UNIBASE - Router Base Adaptor

Sku
UNIBASE
Excl. VAT £23.01 Incl. VAT £27.61 Excl. VAT Incl. VAT £27.61
Only 6 left in stock
-
+
Trend UNIBASE - Router base adaptor. Allows other makes and models of router to use the Trend Guide Bushes for increased diversity.

The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes. It will fit directly to most routers.

  • Line-up pin used with a 16mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base.
  • Suits collet sizes 1/4 inch, 8mm, 12mm and 1/2 inch.
  • Instructions for fitting
  • The line-up pin fit into the collet and is plunged through the router base. The line-up bush is fitted into the Unibase and secured. This is then placed over the line-up pin and rotated in order to line up the fixing holes. The Unibase screws are tightened and then the line-up bush can be replaced with any choice of Trend guide bushes. These range from 10mm up to 30mm (GB10 - GB32). For larger diameter cutters a 40mm guide bush (GB40) is available.
  • Ideal for hinge jig and lock jig

Diameter: 170 mm

Thickness: 8 mm

Bore: 39 mm

Recess:60 mm

Copyright © 2021 CNS Power Tools Limited